Stationary waste disposal system for collecting solvent 2x20 l

Ready-to-use system for installation below the worktop Consists: 1x lid funnel MARCO, GL45, PE-HD electrically conductive, with removable sieve and grounding cable, funnel diameter 157mm OD (140mm ID) 1x table bushing with GL25 (m) below to GL45 (m) above, PE-HD electrically conductive, for table top bore 35mm with lock nut 1x FlexTube 1500: length 1500mm - made of PTFE, electrically conductive and flexibly adjustable ID = 13.4 - 13.9 mm, OD = 16.0 - 16.9 mm - spiral-shaped on the outside and smooth on the inside 2x GL25 screw connections - PTFE electrically conductive 1x hose holder for SymLine FlexTube Pro, suitable for all cabinets 1 x grounding cable 1x clip for FlexTubes, 1x clamp, L = 3 m 1 x stopcock, angled 1x GL25 (f) to 1x GL25 (m), electrically conductive PTFE 1 x safety waste cap, S60/61, electronic level control, GL25 (m), connection for exhaust air filter, electrically conductive PTFE, ATEX-compliant 2 x canisters, 20 litres, S60/61, electrically conductive HD-PE, UN-Y approval, dimensions (W x H x D): 185 x 500 x 290 mm 1 x isolating switching amplifier EU, two-channel isolated barrier, 120 - 230 V AC supply, contact or NAMUR inputs / ATEX: Ex II (1) G [Ex ia] IIC, Ex II (1) D [Ex ia] IIIC 1 x housing for isolating amplifier 108278, LxWxH: 75 mm x 125 mm x 175 mm, material: polycarbonate light gray (RAL 7035), weight: 450g, protection class: IP 66 1 x cable set: connection isolating amplifier / built-in signal box consisting of: 1x 3.5 m cable connection built-in signal box with M8 (m) + 3x cable lugs, 1x 1 x built-in signal box2, 2 - channel (EU), for safety waste caps and other electronic level controls, non-contact alarm acknowledgment fields for two containers, two switching inputs and two switching outputs for peripheral devices incl. 230V power pack, cable with open ends and clamp Sale only to companies.