Apparatus for determination of apparent density USP 616,Methode II/ Ph.Eur 2.9.34-1, ISO 3923/2

This apparatus is used to determine the bulk density (filling density) around the structural uniformity of metallic and various other powdery Check sample materials. To do this, the sample material is placed in a funnel with a 1.00 mm sieve (mesh 18) contains mesh size. There is a distributor under the sieve funnel, the 4 stop plates made of glass contains. The lower end of the distributor opens into a funnel that holds the sample material collects and drains into a 25 ml measuring funnel. The bulk density is calculated by differential weighing. Normative reference • USP <616> bulk density and tapped density of powders, method II • European Pharmacopoeia 7.0 2.9.34. bulk density and tapped density of powders • Determination of the filling density Scott Volumeter method DIN ISO 3923 • ASTM 3299 standard test method for apparent density of metal powders and compounds. Apparatus z. Determination of the bulk density (Art: L50566030) Complete apparatus made of stainless steel, stable and non-slip tripod. The modular structure of the entire apparatus, especially the distributor, enables easy operation and cleaning. Consisting of: • Hopper with sieve with mesh size 1 mm (mesh 18), stainless steel • Distributor with locking plates made of thick-walled glass and funnel outlet • Measuring cup 25 ml +/- 0.05 ml, stainless steel • Drip tray made of "Clean Save Laboratory Glass" • Special tripod with marking, stainless steel • Scraper blade • wrench • Operation manual Sale only to companies.